产品展示
      树脂锚固剂
        发布时间:2012-08-03  已阅 次  [大] [中]

       

      树脂锚固剂 Resin anchor agent


      ▇ 概述 Summary

          

        树脂锚固剂具有常温固化快,粘结强度高,锚固力可靠和耐久性好等特性,尤其适宜机械化快速施工。

        锚固基体:岩石、煤岩体、混凝土等

        适用范围:地下工程及边坡、陡壁锚喷支护、矿山立井装备安装及锚联网支护、建筑构件连接、设备基础锚固等。


        Resin anchoring agent has the characteristics of quick curing at room temperature, high bonding strength, reliable anchoring force and good durability, especially suitable for rapid mechanized construction
        Anchorage matrix: rock, coal and rock mass, concrete, etc
        Scope of application: underground engineering and slope, steep wall shotcrete-bolt support, mine shaft equipment installation and roadway anchor net support, building component connection, equipment foundation anchorage, etc.


       

      ▇ 树脂锚固剂主要技术参数 Main technical parameters of resin anchoring agent


      项目

      Item

      指标

      Indicators 

      抗压强度(MPa

      Compressive strength

      60

      剪切强度(MPa

      Shear strength

      35

      容重(g/cm3

      Density

      1.92.2

      弹性模量(MPa

      Modulus of elasticity

      1.6×104

      粘结强度(MPa

      Bond strength

      混凝土(C30)≥7;螺纹钢≥16

      震动疲劳(万次)

      Vibration fatigue (10,000 times)

      800

      使用环境温度(℃)

      Service ambient temperature(℃)

      -530

      储存期(<25℃,月)

      Storage period(<25℃,month)

      3


      ▇ 树脂锚固剂产品按性能分类 Classification of resin anchoring agents


      单速锚固剂

      Single speed anchoring agent


      双速锚固剂

      Two-speed anchoring agent


      全长锚固剂

      Full-length anchoring agent


       

      ▇ 树脂锚固剂产品按时间分类 Classification by time


      类型

      Type

      特性

      Features

      凝胶时间(S

      Gel time(S)

      等待安装时间(S

      Waiting time for installationS

      颜色标识

      Color identification

      CK

      超快速

      Super fast

      840

      1060

      Red

      K

      快速

      Fast

      4190

      90180

      Blue

      Z

      中速

      Medium speed

      91180

      480

      White

      M

      慢速

      Slow

      180

      ---

      ---

      1:在(22±1)℃环境温度条件下测定。

      Note 1: In (22 + 1) ℃ environment temperature measurement.

      2:搅拌应在锚固剂凝胶之前完成。

      Note 2: stirring should be done before anchorage gel.

       


      ▇ 树脂锚固剂主要规格 Main specifications of the resin anchor agent


      代号

      Code name

      规格

      Specifications

      重量(g/支)

      Weigh(g/Branch)

      适用孔径(mm)

      Applicable aperture (mm)

      支/箱

      Branch / box

      2335

      φ23*350

      310±20

      φ28±2

      50

      2360

      φ23*600

      530±30

      φ28±2

      40

      25180

      φ25*900*2

      1900±100

      φ28±2

      12

      25240

      φ25*1200*2

      2560±110

      φ28±2

      10

      2645

      φ26*450

      520±30

      φ28±2

      30

      26240

      φ26*1200*2

      2700±120

      φ28±2

      8

      2835

      φ28*350

      460±30

      φ32±2

      40

      2850

      φ28*500

      660±30

      φ32±2

      40

      28240

      φ28*1200*2

      3220±130

      φ32±2

      7

      30200

      φ30*1000*2

      3000±120

      φ35±2

      7

      30260

      φ30*1300*2

      4000±150

      φ35±2

      7

      3530

      φ35*300

      610±40

      φ42±2

      40

      3537

      φ35*370

      750±40

      φ42±2

      40

      注:用户特殊需要时,可生产其他规格的锚固剂;在直径18~40mm,长度200~1500mm范围内商定。

      Note: anchoring agent of other specifications can be produced when customers have special needs;Within the range of 18 ~ 40mm in diameter and 200 ~ 1500mm in length.


       

      使用方法 Method of application

       

      1、 根据所设计的钻孔孔径、锚固长度及杆体直径选择适宜的锚固剂规格型号;

      2、 在标定的锚固基体上钻孔;

      3、 除净钻孔内的浮尘并装入锚固剂;

      4、 利用搅拌机具带动锚固杆体边搅拌边推进至孔底,搅拌时间应小于锚固剂凝胶时间;

      5、 完全固化后承载。


      1、According to the designed hole diameter, anchoring length and rod diameter to choose the appropriate type of anchoring agent specifications;

      2、Drill holes into the calibrated anchorage matrix.

      3、Remove the floating dust in the borehole and install anchorage agent.

      4、Use the stirring machine to drive the metal rod body to the bottom of the hole while stirring. The stirring time should be less than the anchorage gel time.

      5、Load-bearing capacity after complete curing.



       树脂锚固剂产品流程 Resin anchoring agent product process


      • 锚固剂自动化生产线
      • Anchoring agent automatic production line


      • 锚固剂自动剪切机
      • Automatic shearing machine for anchorage agent


      • 锚固剂包装成箱
      • The anchoring agent is packed in boxes


      • 产品出口装车
      • Export loading








       

      文本标签:    美亚高新材料股份有限公司
      地址:安徽省淮南市谢家集区淮南高新区智造园卧园路南 销售电话:0554-5812738 传真:0554-5812746 企业邮箱:ahhhgx@gmail.com
         皖ICP备08000330号

      皖公网安备 34040402000033号


      欧洲性开放大片